Cycling water bottle Quick water refill

High capacity/squeeze jet/leak proof design

PP5 safety material
Extrusion injection
Multi-color option
Seal the leak-proof valve

Drinking water while riding Small "TIPS"

If you do not pay attention to water supply during riding, it will affect the quality of riding, It may also cause dehydration, if dehydration 20% May lead to life danger! Therefore, every cycling veteran attaches great importance to the reasonable supplement of water in cycling. When riding for more than 2 hours, drink 300ML of water before starting.In the process of riding, there should be regular water, about every 20 minutes to supplement 100ML. In the summer, you tend to sweat, so you need to drink more water.

Soft bottle body Extruded effluent

Bottle body soft extrusion water, easy and effortless. Water quickly, quickly replenish water

Food grade PP5 material. Let you drink water safely

The lid is made of No. 5 PP material, safe and odor-free. Take care of your water health

Leakproof spout Inverted watertight

Leak-proof bottle cap, can be locked without leakage, silicone spout, bite water

Concave molding Easy to grab

The concave part of the bottle is easy to grab and not easy to slip

7.5cm standard diameter Suitable for most kettle holders

Suitable for most of the water bottle holders with a diameter of 7cm on the market Clamp firmly and do not fall

Large caliber easy to clean

Easy water filling, Clean anytime 1.The recommended temperature is 0°C to 70°C   2.Do not steam sterilize or cook, do not sterilize cabinets

Product Parameter

Brand: ThinkRider
Name: Cycling water bottle
Material: Polypropylene pp5(bottle body/cap)
Slicone(dustcap/nozzle)
Capacity: ≈620ml/750ml
Weight: ≈64g/68g
Diameter: ≈7cm
WaterTemp: 0℃-70℃
Height: 19.5cm/23cm
Apply: Cycling Running Outdoors

BE CAREFUL

1. Do not fill with boiling water!
The body quality of the cup itself is not resistant to high temperature, and it is not recommended to fill with superheated high temperature water (recommended temperature:Within 0°C-70°C) to avoid deformation of the kettle due to overheating.

2. Disinfection recommendation
Do not steam disinfect the cup or cook it, which will cause the cup to deform. Clean it with warm water
Do not disinfect it in the disinfection cabinet

3.Water bottle to remove odor method
1. Milk deodorization method:
Clean with dish soap, then pour two tablespoons of fresh milk into a plastic cup
Put the lid on and shake it so that every corner of the cup is in full contact with the milk,
For about a minute, pour out the milk and clean the cup.
2. Orange peel flavor removal method:
Clean with detergent first, then put the peel of the fresh orange into the bottle and cover
Leave the lid for 3 to 4 hours and then scrub the cup.

Product shooting